Step 1: Install OpenWrt

1. Visit the OpenWrt Official Website.
2. Download the Installer.
3. Load the System Prompt and follow the installation instructions.
4. Enable OpenWrt by right-clicking the system logo and selecting "Properties" > "Enabling & Managing Network & Wi-Fi."

Step 2: Create a New Network

1. Open the Command Prompt.
2. Enter the following command to create a new network:

   networks

3. Select "New Network" and name it "Test Network."
4. Set the Interface to use the admin interface.
5. Configure the Network with an IP address (e.g., 192.168.1.1) and MAC address.
6. Save and Exit.

Step 3: Test the Network

1. Check if the Network is Running by typing:

   test

2. Enable the Network if not running by typing:

   test -l

Step 4: Test the Wi-Fi Interface

1. Verify the Network by typing:

   test -s

2. List the Interfaces with:

   ifconfig

   The Wi-Fi interface should appear.

3. Check Wi-Fi Settings:

   • Enable Wi-Fi and Set IP Address in the Wi-Fi settings.
   • Configure MAC Address if needed.

Step 5: Troubleshoot

• Check the Wi-Fi Settings: If the interface is missing, use:

  ifconfig list-wi-Fi

• Enable Wi-Fi directly: Open the network, go to Wi-Fi settings, and enable.

Step 6: Connect to Local Machine

1. Check Local Machine: Use:

   ifconfig local

2. Enable Wi-Fi on Local Machine: Configure Wi-Fi settings on the local machine.

Step 7: Troubleshoot Again

• Test Connectivity: Use:

  ifconfig

• Check Wi-Fi Settings: Ensure the MAC address and IP match your setup.

Summary

By following these steps, you can set up and test a network using OpenWrt with Wi-Fi connectivity. If issues arise, consult OpenWrt documentation or online tutorials for troubleshooting.